![](/images/new-backgrounds/1265197/26519735x1.webp)
Wireless-G Broadband Router with SRX200
•Static IP. If you are required to use a permanent IP address to connect to the Internet, select Static IP.
Internet IP Address. This is the Router’s IP address, when seen from the Internet. Your ISP will provide you with the IP Address you need to specify here.
Subnet Mask. This is the Router’s Subnet Mask, as seen by users on the Internet (including your ISP). Your ISP will provide you with the Subnet Mask.
Gateway. Your ISP will provide you with the Gateway Address, which is the ISP server’s IP address.
Static DNS
•PPPoE. Some
User Name and Password. Enter the User Name and Password provided by your ISP.
Connect on Demand: Max Idle Time. You can configure the Router to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically
Keep Alive Option: Redial Period. If you select this option, the Router will periodically check your Internet connection. If you are disconnected, then the Router will automatically
Chapter 5: Configuring the
Figure 5-4: Static IP Connection Type
static ip address: a fixed address assigned to a computer or device connected to a network.
subnet mask: an address code that determines the size of the network
Figure 5-5: PPPoE Connection Type
pppoe: a type of broadband connection that provides authentication (username and password) in addition to data transport
12
The Setup Tab - Basic Setup