Linksys WRT54GX2 manual Status Tab Local Network

Models: WRT54GX2

1 85
Download 85 pages 57.23 Kb
Page 46
Image 46

Wireless-G Broadband Router with SRX200

The Status Tab - Local Network

The Local Network screen on the Status Tab displays the status of your network.

Local Network

MAC Address. This is the Router’s MAC Address, as seen on your local, Ethernet network.

IP Address. This shows the Router’s IP Address, as it appears on your local, Ethernet network. Subnet Mask. When the Router is using a Subnet Mask, it is shown here.

DHCP Server. If you are using the Router as a DHCP server, that will be displayed here.

Starting IP Address. For the range of IP Addresses used by devices on your local, Ethernet network, the beginning of that range is shown here.

Ending IP Address. For the range of IP Addresses used by devices on your local, Ethernet network, the end of that range is shown here.

DHCP Client Table. Clicking this button will open a screen to show you which PCs are utilizing the Router as a DHCP server.

Click the Refresh button to update the on-screen information. Help information is shown on the right-hand side of the screen.

Chapter 5: Configuring the Wireless-G Broadband Router

Figure 5-42: Status Tab - Local Network

Figure 5-43: DHCP Active IP Table

40

The Status Tab - Local Network

Page 46
Image 46
Linksys WRT54GX2 manual Status Tab Local Network