Linksys WRT54GX2 manual Windows 2000 or XP Instructions, For the Router’s Web-based Utility

Models: WRT54GX2

1 85
Download 85 pages 57.23 Kb
Page 71
Image 71

Wireless-G Broadband Router with SRX200

Windows 2000 or XP Instructions

1.Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the OK button.

2.At the command prompt, enter ipconfig /all. Then press the Enter key.

3.Write down the Physical Address as shown on your computer screen; it is the MAC address for your Ethernet adapter. This appears as a series of numbers and letters.

The MAC address/Physical Address is what you will use for MAC address cloning or MAC filtering.

NOTE: The MAC address is also called the Physical Address.

Another screen will show the Ethernet adapter’s IP address. (Shown in the example as 192.168.1.100.) Your computer may show something different.

For the Router’s Web-based Utility

For MAC address cloning, enter the 12-digit MAC address in the MAC Address fields provided, two digits per field. For wireless MAC filtering, enter the 12-digit MAC address in this format, XXXXXXXXXXXX, WITHOUT the hyphens.

Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter

Figure E-4: MAC Address Clone

Figure E-5: Wireless MAC Filter List

65

Windows 2000 or XP Instructions

Page 71
Image 71
Linksys WRT54GX2 manual Windows 2000 or XP Instructions, For the Router’s Web-based Utility