Linksys WRT54GX2 manual Setup Tab MAC Address Clone, Mac address the unique address that a

Models: WRT54GX2

1 85
Download 85 pages 57.23 Kb
Page 23
Image 23

Wireless-G Broadband Router with SRX200

The Setup Tab - MAC Address Clone

A MAC address is a 12-digit code assigned to a unique piece of hardware for identification. Some ISPs will require you to register a MAC address in order to access the Internet. If you do not wish to re-register the MAC address with your ISP, you may assign the MAC address you have currently registered with your ISP to the Router with the MAC Address Clone feature.

MAC

Enable/Disable. To have the MAC Address cloned, click the radio button beside Enable.

 

User Defined Entry. Enter the MAC Address registered with your ISP here.

 

Clone Your PC’s MAC. Clicking this button will clone the MAC address of your registered PC.

 

Change these settings as described here and click the Save Settings button to apply your changes or Cancel

Figure 5-13: Setup Tab - MAC Address Clone

Changes to cancel your changes.

 

 

mac address: the unique address that a

 

manufacturer assigns to each networking device.

Chapter 5: Configuring the Wireless-G Broadband Router

17

The Setup Tab - MAC Address Clone

Page 23
Image 23
Linksys WRT54GX2 manual Setup Tab MAC Address Clone, Mac address the unique address that a