Detection
cSelect the desired channel, and press “Edit” to enter the motion detection sensitivity and area setting box.
dMotion Detection Sensitivity: Set the detection sensitivity in 4 different adjustable factors.
LS: The sensitivity of comparing two different images. The smaller the value, the higher sensitivity for the motion detection.
SS: The sensitivity towards the size of the triggered object on the screen (the number of motion detection grids). The smaller the value, the higher sensitivity for the motion detection.
TS: The sensitivity towards how long the object stays in the detection area to get triggered. The smaller the value, the higher sensitivity for the motion detection. RE: The value of RE is a reference for the detection. The bigger the value, the higher sensitivity for the motion detection.
eAlarm:
Select LOW / HIGH for the alarm polarity.
f |
| Motion Detection Area | : | Note: Enable the motion detection function. | |
|
| By clicking the area with your | When the motion is triggered, | ||
| mouse, one can choose the | a “ | ” icon will be shown on the | ||
| motion area to be detected. The | screen. And the software AP will | |||
| under detected area is transparent | start recording automatically. | |||
while the undetected area is in pink color.
*Click “Select All” to activate the detection area as the full area. *Click “Clear All” to clean the previously selected detection area. After setting, press “OK” and then press “APPLY” to confirm.
38
