4.7 ADVANCED MENU ___DETECTION
Move the cursor to “DETECTION” and press ”ENTER”. The screen will show the following options.
DETECTION
DETECTION SETUP
DETECTION TIMER
1)DETECTION SETUP:
DETECTION
TITLE | DET | AREA | LS | SS | TS | RE | ALARM |
01 | ON | SETUP | 07 | 03 | 02 | 10 | OFF |
02 | ON | SETUP | 07 | 03 | 02 | 10 | LOW |
03 | ON | SETUP | 07 | 03 | 02 | 10 | HIGH |
04 | ON | SETUP | 07 | 03 | 02 | 10 | OFF |
a)TITLE:
Show the camera title of each channel.
b)DET:
Select “ON” to activate the motion detection function of the selected channel. Select “OFF” to inactivate the motion detect function of the selected channel.
c)AREA:
Press the “ENTER” button to set the detection area.
Pink blocks represent the area that is not being detected while the transparent blocks are the areas under detection.
Press “ENTER” to confirm the start area
Press ◄ or ► to choose the width of the area
Press ▲ or ▼ to choose the height of the area, and press “ENTER” again to confirm.
Press “－” to set the whole | Press “＋” to set the whole | |
| area under detection | undetected |
17
