1.Scroll through the displayed pages until the Trim Tab page is on the main display.
2.Press MENU, select CALIBRATE TAB and press ENTER, which will launch the following message: Bring Tabs Full Up Press Enter.
3.Adjust the position of the Trim Tabs to the Full Up Position and press ENTER. A second message will appear: Run Tabs Full DN (Down).
4.Move the Trim Tabs into the full down position. The Trim Tabs are now calibrated. Recalibration can be performed at any time and as many times as necessary by following the step by step trim tab calibration instructions listed in this section.
Trim Tabs menu (left). When calibrating Trim Tabs, the Full Up message (center) appears first. It is followed by the Run Tabs Full Down message (right).
29
