2.In this example, we'll select SHALLOW and press ENTER. A small menu will appear, giving you the option to turn off the alarm or set the depth.
3.Select SET DEPTH and press ENTER.
4.Use the UP and DOWN keys to select the desired depth and press ENTER. To set the Deep alarm, press EXIT, select DEEP from the alarms menu and press the ENTER key.
Sonar Alarms highlighted on System Setup menu (left). Sonar Alarms menu (center); Reset Values selected on System Setup menu (right).
5.Choose SET DEPTH, then use the UP and DOWN keys to set the alarm to the desired depth. Press ENTEREXITEXIT to return to the System Setup menu.
Engine/Tank Configuration
1.From the System Setup menu, scroll down to ENG/TANK CFG and press ENTER. Boat Setup will be highlighted. Press ENTER, which will bring up the following message: Press Enter to reset Eng/Tank Cfg. Press
ENTER.
3.The Boat Setup title bar will appear on the screen. Press ENTER to access the Boat Setup menu. The Boat Setup menu options are: 1 Eng/1 Tank, 1 Eng/2 Tank, 2 Eng/1 Tank, 2 Eng/2 Tanks, 3 Eng/1 Tank or 3 Eng/3 Tanks.
4.Choose the option that applies to your vessel and press ENTER, which will bring up the Set Tank Size menu. It will appear with up to three options, depending on the number of tanks you chose during Boat Setup. The options are: Port Tank, Stbd Tank and Cen Tank. (If you selected one tank during Boat Setup, you won't see any of these options. You will be taken directly to the Setting Tank Size Window.)
5.Select the tank you want to set up and press ENTER, which will launch the Setting Tank Size window.
6.Use the UP and DOWN keys to enter how many gallons the tank will hold and press ENTER.
Press EXIT and repeat steps 3 and 4 for each of the remaining tanks.
7.After all tanks on your vessel have been setup, press EXIT repeatedly to be directed back to the main display.
39
