Lowrance electronic LMF-400 manual

Page Scrolling

Once you have added the pages you want to monitor, you'll have two ways to view them on the display. You can scroll through the pages manually by using the ENTER and EXIT keys or utilize the Page Scrolling function to automatically scroll through the pages at an interval of your choosing.

To activate Page Scrolling:

1.Press MENU, select PAGES and press ENTER.

2.Select PAGE SCROLLING and press ENTER. The Page Scrolling menu will appear with two settings: Off and Set Time.

3.To set the scrolling interval, choose SET TIME and press ENTER.

4.Use the UP and DOWN keys to select an interval between one and 60 seconds. At the bottom of the Set Time display will be a message, Press Enter when finished. After you are satisfied with the selected interval, press ENTER.

To turn off Page Scrolling:

To get back into the Page Scrolling menu, repeat the steps you used to activate Page Scrolling.

But this time, when you access the Page Scrolling menu, select OFF instead of SET TIME.

Pop-Ups Setup

Pop-Ups Setup is accessed from the basic menu by selecting PAGES and pressing ENTER. Scroll down to Pop Ups Setup and press ENTER. Four options will appear: RPM, Engine Trim, Trim Tabs and Stay-on Time.

The Pop-Ups feature makes it possible for you to be alerted when the category you selected (RPM, Engine Trim, Trim Tabs) exceeds a threshold of your choosing. When a threshold is exceeded, the main page for the category will pop up on the main display for a preset duration. You can choose how long the page will be displayed via the Stay-on Time option.

RPM: If you highlight RPM and press ENTER, a pair of menu options

will appear: Off and Set Threshold. Select OFF to turn off a RPM pop up or highlight Set Threshold and press ENTER, to set a RPM threshold. The threshold for RPM ranges from 50 to 3,000 RPM.

Engine Trim: If you select ENGINE TRIM and press ENTER, a pair of menu

options will appear: Off and Set Threshold. Select Off to turn off an Engine Trim pop up or highlight Set Threshold and press ENTER, to set an Engine Trim threshold. The threshold for Engine Trim ranges from 3% to 50%.

Trim Tabs: If you choose TRIM TABS and press ENTER, a pair of menu

options will appear: Off and Set Threshold. Select OFF to turn off a Trim

14