Lowrance electronic LMS-480M, LMS-480DF manual Indicator Line made From trail Arrival, Alarm, Arrow

Track or compass heading indicator

Trail	Cross track
waypoint
	error range
symbol
	(off course
Course	indicator)
line made
from trail
			Arrival
		Bearing	alarm
		arrow

Navigate trail, navigation page (compass rose) views: at left, driver is northbound heading straight toward trail point 6; bearing arrow shows the trail point is due north (straight ahead.) At right, driver has reached trail point 6 and must turn west to follow the trail. Arrival alarm goes off and bearing arrow swings around to say turn left (west), toward the next waypoint, trail point 7. The unit now shows naviga- tion information to point 7, which is 2.02 miles away.

Navigate a Back Trail (backtrack, or reverse)

1.Press MENUMENU↓ to MY TRAILSENT.

2.Press ↓↓ to enter the Saved Trail list, then use ↑ or ↓ to select the desired Trail NameENT.

3.Press → to DELETE TRAIL↓ to NAVIGATEENT.

4.Press ↓ to NAVIGATE→ to REVERSEENT← to NAVIGATEENT. The unit begins showing navigation information along the trail, in reverse.

NOTE:

If you are already located at or near the end of your trail, the arri- val alarm will go off as soon as you hit Enter. Just press EXIT to clear the alarm and proceed.

5.Now, begin moving and follow your unit.

6.When you reach your destination, be sure to cancel your navigation: press MENUMENU↓ to CANCEL NAVIGATIONENT. The unit asks if you're sure; press ←ENT.

127