Lowrance electronic LMS-480M, LMS-480DF manual Save Dataent

2.The Transfer My Data menu includes a message which tells you if an MMC is present or not. If no MMC is present, you must first insert a card into the unit in order to activate the Load or Save commands.

To transfer data from the unit to the MMC: press ENT (for SAVE.)

To transfer data from the MMC to the unit: press → to LOADENT.

3.Saving to MMC: To accept the default name "Data" for the GPS Data File, press ↓ to SAVE DATAENT. If you wish to rename the file (as

shown in the following figures), press ENT to activate the selection box. Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the name is correct. Then, press ENT↓ to

SAVE DATAENT.

The unit will display first a progress then a completion message when the data transfer is finished. To return to the Page view, repeatedly press EXIT.

From left to right, these figures show the menu sequence for naming

and saving a GPS Data File from the unit's memory to an MMC.

4.Loading to unit memory: There may be more than one GPS Data

File (*.USR) on the card. To select a file, press ENT to activate the selec- tion box, use ↓ or ↑ to highlight the file, then press ENT to accept the selection. Next, press ↓ to LOAD DATAENT. The unit will display a com- pletion message when the data transfer is finished. To return to the Page view, press EXITEXITEXITEXIT.

129