At left, Sonar Page menu with Depth Range command selected. At
right, the Depth Range Control Scale.
2.The Depth Range Control Scale appears. Press ↑ or ↓ to select a dif- ferent depth range. A black bar highlights the selected range. Range numbers in gray cannot be selected.
3.When the new range is selected, press EXIT to clear the menu.
Depth Range - Manual
You have complete control over the range when the unit is in the man- ual mode. There are 16 depth ranges, from 5 feet to 4,000 feet.
To switch to Manual Depth Range:
1.First, turn off automatic depth range. From the Sonar Page, press
MENU↓ to AUTO DEPTH RANGEENT.
2.Press ↑ to DEPTH RANGEENT and the Depth Range Control Scale ap- pears.
3.Press ↓ or ↑ to select a different depth range. A horizontal black bar highlights the selected range.
4.When the new range is selected, press EXIT to clear the menu.
To turn Auto Depth Range on again:
From the Sonar Page, press MENU↓ to AUTO DEPTH RANGEENTEXIT.
NOTE:
The sonar's depth capability depends on the transducer installa- tion, water and bottom conditions, and other factors.
64
