Lowrance electronic LMS-480M, LMS-480DF manual Navigate a Route in Reverse

3. Upon arrival at your destination, cancel navigation:

press MENUMENU↓ to CANCEL NAVIGATIONENT← to YESENT.

The following figures show what the Navigation Page and Map Page look like while navigating a route.

Navigate a Route in Reverse

Here's how you run a route backward, from the end waypoint to the beginning waypoint:

1.From the NAVIGATION PAGE, press MENUENT or from the MAP PAGE, press MENUMENU↓ to ROUTE PLANNINGENT.

2.Press ↓ to select route nameENT↓ to NAVIGATE→ to RE-

VERSEENT← to NAVIGATEENT.

3. Upon arrival at your destination, cancel navigation:

press MENUMENU↓ to CANCEL NAVIGATIONENT← to YESENT.

Figure 1. Figure 2.

Figure 3.

Figure 4.

Navigating along a route: Fig. 1 shows the Navigation Page at the start of a route, heading straight for the first waypoint (Wpt 1). In Fig. 2, the traveler has arrived at Wpt 1; the arrival alarm has been triggered and the bearing arrow on the compass rose has turned to point toward Wpt 2, off to the east. In Fig. 3 the traveler has turned east on his new course and is heading straight for Wpt 2, which is 2.37 miles away. Fig. 4 shows route navigation on the Map Page. In this figure, the traveler has reached Wpt 2 and is half-way along the leg between Wpts 2 and 3.

139