Lowrance electronic LMS-480DF, LMS-480M manual Customize Page Displays, Customize Satellite Status

1.Press MENUMENU↓ to GPS SETUPENT.

2.Press ↓ to COORDINATE SYSTEMENT.

3.Press ↓ to SETUP MAP FIXENT.

The screen below appears, and MAP SCALE is highlighted. Press ENT and enter the map's scale. This is generally at the bottom of the paper map. It's shown as a ratio, for example 1:24000. Press EXIT and the unit re- turns to the Configure Map Fix screen.

Configure a map fix so the unit can find your position on a printed

chart or topographical map.

Press → to SELECT ORIGINENTENTENT to bring up the waypoint list. Select the waypoint that you saved the reference point under and press ENT. The unit displays a waypoint information screen with the com- mand SET AS ORIGIN selected; press ENT and the unit returns to the Con- figure Map Fix menu. Finally, press EXIT to erase this menu. Now press

↑to COORD SYSTEMENT, select MAP FIX from the list and press ENTEXIT. All position information now shows as a distance from the reference point you chose.

Customize Page Displays

The Position, Navigation, and Map pages all have customizable options. These options decide which information is viewable on each page.

Customize Satellite Status Page

While on the Satellite Status Page, press MENU↓ to CUSTOMIZEENT. Press ↓ or ↑ to select a data box. With the data box highlighted and flashing, press ENT to open a list of options. Scroll ↑ and ↓ to select a different data option, then press ENT. After all options are set, press EXIT to return to the page display.

152