Lowrance electronic LMS-480DF, LMS-480M manual 188

A. To navigate to the waypoint, press ENT. (The Go To Waypoint command is already highlighted.) The unit will show navigation in- formation to the waypoint.

B. To find the waypoint, press ↓ to FIND ON MAPENT. The Map Page appears with the cursor highlighting the found waypoint.

Waypoint Information screens with the Go To Waypoint command se-

lected, left, and the Find on Map command selected, right.

To clear these menus and return to the previous page, press EXIT re- peatedly.

5.If you're looking by name, there are two options: A. You can spell out the name in the top selection box. Press ↑ or ↓ to change the first letter, then press → to move the cursor to the next letter and repeat

until the name is correct, then press ENTENT. B. Or you can jump down to the lower selection list by pressing ENT, then press ↓ or ↑ to select a waypoint from the list, then press ENT. The waypoint informa- tion screen appears.

Find By Name menu, left. Waypoint Information screen, center. At right,

the found waypoint is highlighted by the cursor on the Map Page.

188