Edit Route Waypoints menu.

3.Use ↓ and ↑ to select a command from the Edit Route Waypoints menu and press ENT. Add From Map lets you insert a waypoint in the route by clicking on a map location with the cursor. Add Waypoint calls up the Waypoint List so you can insert a waypoint from the list. Re- move Waypoint will delete the waypoint from the route. View Waypoint will show you where the selected waypoint is on the map.

NOTE:

When adding waypoints to a route, the inserted waypoints will ap- pear in the route in front of the waypoint you have selected. To in- sert waypoints at the end of the route, make sure to select "(End of route)" before adding them.

Navigate a Route

1.From the NAVIGATION PAGE, press MENUENT or from the MAP PAGE, press MENUMENU↓ to ROUTE PLANNINGENT.

Route Planning command on Main Menu, left; Routes menu, center; Edit

Route menu, right. Navigate command is selected in the Action box.

2. Press ↓ to select route nameENT↓ to NAVIGATEENT.

138

Page 146
Image 146
Lowrance electronic LMS-480DF, LMS-480M manual Press ↓ to select route nameENT↓ to Navigateent 138