Bridging/Manual Exclusion, Auto Callback | Lucent Technologies 8405

Auto Callback

3Pick up the handset when you hear priority ring [ringback tone]

∙A call is automatically placed to called extension, which receives regular ringing


	Note: Only one Automatic Callback call at a time
	can be placed, and Automatic Callback is canceled
	after 20 to 40 minutes if the callback call is
	unanswered.

To cancel Automatic	1 If you are using an 8405 with a display, press
					Menu
Callback	and then press the softkey below AutCB again
	(while on-hook)
	If your 8405 does not have a display, press
			again (while off-hook)
		Auto Callback
	or Dial the Automatic Callback cancel code
	(while off-hook) __________			[confirmation tone]

∙Green light next to

Auto Callback

goes off

Bridging/Manual Exclusion

To answer a bridged call 1 Press the call appearance button of the bridged call

Note: If your terminal has Ringing Appearance Preference, this step is not necessary; you will automatically be connected to the call when you lift the handset.

2Pick up the handset or press

Speaker

To use Manual Exclusion 1 Press Exclusion xxxxx while connected to the call feature to prevent other

bridged voice terminals

Note: Pressing Exclusion xxxxx again reactivates

from entering a call (on a per-call basis)

bridging.

20

Image 24

Lucent Technologies 8405 manual Bridging/Manual Exclusion, Auto Callback, Speaker

Contents

555-104-726 Comcode 107985574 Issue June DEFINITY Communications System Generic 2 and System8405 Voice Terminal User’s Guide TO ORDER COPIES OF THIS DOCUMENT Contents Exit Normal Inspect Message Retrieval Normal Exit Time/Date Timer Quick Reference Lists Your 8405 Voice Terminal Figure 1. One Version of the 8405B and 8405B Plus Voice Terminal Volume Handsetcontrol button Figure 4. Another Version of the 8405D and 8405D Plus Voice Terminal A handset is provided for placing and receiving calls If your 8405B Plus or 8405D Plus has the Reset Spkr label For adjusting the volume of the following A Quick Look at the Features Voice FeaturesPage Page Display Features and Features Used with the Softkeys Normal See “Exit.” How to Use the Features General Instructions Conventions Used in The Following Procedures Troubleshooting Later in This GuideQuick Reference Lists at the Back of This Guide Meanings Using the Display, Softkeys and Display Control Buttons Entering Softkey Mode and Viewing the Three Feature Option Screens Figure 6. The Three Feature Option Screens Using the Softkeys to Activate a Feature To reset the speakerphone automatic. No user response is required Voice Feature Procedures Abbreviated Dialing ADHandset and Speaker 3 Press Personal List 6 Press Personal List if you used Personal List in StepDrop Automatic Callback Bridging/Manual Exclusion Auto CallbackSpeaker Call Coverage/Consult Coverage CallbackConsult Call Forwarding - Busy/Don’t Answer Call Forwarding - Follow Me Call Park Call Pickup Conference Handset Volume DropHANDSET L H Hold Intercom Automatic/DialIcom Auto Last Number Dialed Leave Word Calling LWC To leave a message Message Mute Priority Calling Reset Speakerphone Select Ring and Ringer Volume 4 When you hear the desired ringing pattern press Shift again Send All Calls RINGER L H Speaker Send All Calls SPEAKER L H Mute Speakerphone 1 Press Mute Test Transfer Display Feature Procedures Exit NormalInspect Call Information Message Retrieval 1 Press Inspect1 Press Message Retrieve Return Call Normal Exit Time/Date Timer Timer Tones and Their Meaning Ringing TonesFeedback Tones Troubleshooting ProblemSolution Problem Key Words to Know access code See feature access code party A person who places or answers a call Page Page FEATURE ACCESS CODES FeatureCode Cancel Abbreviated Dialing MiscellaneousTrunk Codes Description