Lucent Technologies 8405 manual Last Number Dialed, Leave Word Calling LWC

Last Number Dialed

To automatically redial	1	Press	Last Dialed	(while off-hook)
the last number you		or Dial the Last Number Dialed access code
dialed (up to 24 digits)
		__________ (while off-hook)
(extension, outside
		∙ Number is automatically dialed
number, or trunk/feature
access code)		Note: Available with a DEFINITY Generic 2 and
		with System 85 R2V4 and some R2V3 systems.
		Check with your system manager to learn if the
		feature is available on your system.
		Limitations on this feature should be noted. Digits
		dialed via Abbreviated Dialing, feature dial codes,
		authorization codes, and Station Message Detail
		Recording (SMDR) account codes are not retained in
		memory and must be redialed for each call.
To see the number you	1	Press		(while on-hook)
			Last Dialed
last dialed (you must have		∙ Last number dialed is shown on the display screen
a voice terminal with a

display, and you must be on-hook)

Leave Word Calling (LWC)

You can access the Leave Word Calling feature (LWC) and the Cancel Leave Word Calling feature (CnLWC) with the softkeys only if your voice terminal has a display.

To leave a message after	1 If you are using an 8405 with a display, press		Menu
dialing an extension	and then press the softkey below LWC after you
(when call is not	complete dialing
answered, or you hear a	If your 8405 does not have a display, press			any
		LWC
coverage or busy tone)
	time after you complete dialing
	[confirmation tone]
	∙ Message light goes on at the called voice terminal
	(if so equipped)
	Note: If reorder tone is heard, the message is not
	stored; try again.

28