Call Forwarding - Follow Me | Lucent Technologies 8405 specification

Call Forwarding — Follow Me

Call Forward

Call Forwarding — Follow Me

You can access this feature with the softkeys only if your voice terminal has a display.

To temporarily redirect all calls to an extension or outside number of your choice

Note: If you have a button,

check with your system manager to see which type of Call Forwarding it activates.

1If you are using an 8405 with a display, press Menu and then press the softkey below CFrwd

(while off-hook)

If your 8405 does not have a display, press Call Forward (while off-hook)

or Dial the Call Forwarding — Follow Me access

code __________ (while off-hook)

[dial tone]

2Dial the extension or number where calls will be sent [confirmation tone]

Note: You may hear a half ring for each call forwarded after you have activated this feature and hung up. Also, some voice terminals may have restrictions on where calls can be forwarded; see your system manager.

3Hang up

To cancel Call Forwarding — Follow Me

1If you are using an 8405 with a display, press Menu and then press the softkey below CFrwd

(while off-hook)

If your 8405 does not have a display, press Call Forward (while off-hook)

or Dial the Call Forward cancel code _______

(while off-hook)

[confirmation tone]

2Hang up

∙Your calls will ring at your own voice terminal again

23

Image 27

Lucent Technologies 8405 manual Call Forwarding - Follow Me

Contents

555-104-726 Comcode 107985574 Issue June DEFINITY Communications System Generic 2 and System8405 Voice Terminal User’s Guide TO ORDER COPIES OF THIS DOCUMENT Contents Quick Reference Lists Exit Normal Inspect Message Retrieval Normal Exit Time/Date Timer Figure 1. One Version of the 8405B and 8405B Plus Voice Terminal Your 8405 Voice Terminal button VolumeHandset control Figure 4. Another Version of the 8405D and 8405D Plus Voice Terminal A handset is provided for placing and receiving calls If your 8405B Plus or 8405D Plus has the Reset Spkr label For adjusting the volume of the following Voice Features A Quick Look at the FeaturesPage Page Normal See “Exit.” Display Features and Features Used with the Softkeys General Instructions How to Use the Features Meanings Conventions Used in The Following ProceduresTroubleshooting Later in This Guide Quick Reference Lists at the Back of This Guide Entering Softkey Mode and Viewing the Three Feature Option Screens Using the Display, Softkeys and Display Control Buttons Figure 6. The Three Feature Option Screens Using the Softkeys to Activate a Feature automatic. No user response is required To reset the speakerphone Voice Feature Procedures Abbreviated Dialing ADHandset and Speaker 3 Press Personal List 6 Press Personal List if you used Personal List in StepDrop Automatic Callback Bridging/Manual Exclusion Auto CallbackSpeaker Call Coverage/Consult Coverage CallbackConsult Call Forwarding - Busy/Don’t Answer Call Forwarding - Follow Me Call Park Conference Call Pickup Handset Volume DropHANDSET L H Hold Intercom Automatic/DialIcom Auto Leave Word Calling LWC Last Number Dialed To leave a message Mute Message Priority Calling Reset Speakerphone Select Ring and Ringer Volume 4 When you hear the desired ringing pattern press Shift again RINGER L H Send All Calls Send All Calls Speaker Mute SPEAKER L H Speakerphone 1 Press Mute Transfer Test Call Information Display Feature ProceduresExit Normal Inspect Return Call Message Retrieval1 Press Inspect 1 Press Message Retrieve Time/Date Normal Exit Timer Timer Tones and Their Meaning Ringing TonesFeedback Tones Troubleshooting ProblemSolution Solution access code See feature access code Key Words to Know party A person who places or answers a call Page Page Cancel FEATURE ACCESS CODESFeature Code Description Abbreviated DialingMiscellaneous Trunk Codes