Display Feature Procedures
This section includes the procedures for five display features you may use with the 8405 voice terminal equipped with a display. However, note that the display, along with the softkeys and display control buttons, can also be used for accessing up to 12 softkey features. For procedures on using the display and softkeys and a list of the features that can be accessed with the softkeys, see “Using the Display, Softkeys, and Display Control Buttons” earlier in this guide.
Call Information
You may have as many as 5 call appearance buttons. Beginning with the uppermost button and going down, the display identifies the buttons as a through e. When the
display shows | a= |
| it represents call information for the first call appearance | |||
button. The next button down would be shown as |
| , and so on, continuing | ||||
b= | ||||||
through |
| if all 5 of the buttons are used for call appearances. | ||||
e= | ||||||
When you dial an extension, that number is shown then replaced by the called party’s name and extension. When a call is received from another extension, the caller’s name is shown; when a call is received from outside, “OUTSIDE CALL” or a trunk identifier is shown.
The display remains in Normal
Exit (Normal)
✔
To return to normal | 1 Press | Exit |
| |
display after using any | ∙ Display will show call information for the active | |||
display feature | ||||
call appearance | ||||
| ||||
Inspect
To see who’s calling | 1 Press | Inspect |
| |
(if you are already on | ∙ Name and number of caller are shown if from | |||
a call) | ||||
extension; “OUTSIDE CALL” or the trunk source | ||||
| ||||
| is shown if the call is from outside. | |||
2Press
Exit
to return to the display for the present call
41
