Call Park | Lucent Technologies 8405 specs

Call Park

Call Park

You can access this feature with the softkeys only if your voice terminal has a display.

To park a call (for retrieval at any extension)

1 Press

Transfer

[dial tone]

∙Second party is temporarily put on hold

2Press Menu and then press the softkey below CPark or Press Call Park

or Dial Call Park trunk group access code __________

[dial tone]

3Dial Call Park zone number

4Dial an idle Answer Back channel number [confirmation tone]

5Press Recall

6 Press

Transfer

[ringback tone]

7Hang up

∙Held party is transferred to the answer-back channel and hears ringback tone (or music) while waiting

To retrieve a parked call from any extension

1Dial the Call Park Answer Back code __________

2Dial the channel number where call was parked [confirmation tone]

Note: If you receive intercept tone, the parked call has been disconnected or retrieved by another party.

24

Image 28

Lucent Technologies 8405 manual Call Park

Contents

DEFINITY Communications System Generic 2 and System 555-104-726 Comcode 107985574 Issue June8405 Voice Terminal User’s Guide TO ORDER COPIES OF THIS DOCUMENT Contents Exit Normal Inspect Message Retrieval Normal Exit Time/Date Timer Quick Reference Lists Your 8405 Voice Terminal Figure 1. One Version of the 8405B and 8405B Plus Voice Terminal Volume Handsetcontrol button Figure 4. Another Version of the 8405D and 8405D Plus Voice Terminal A handset is provided for placing and receiving calls If your 8405B Plus or 8405D Plus has the Reset Spkr label For adjusting the volume of the following A Quick Look at the Features Voice FeaturesPage Page Display Features and Features Used with the Softkeys Normal See “Exit.” How to Use the Features General Instructions Conventions Used in The Following Procedures Troubleshooting Later in This GuideQuick Reference Lists at the Back of This Guide Meanings Using the Display, Softkeys and Display Control Buttons Entering Softkey Mode and Viewing the Three Feature Option Screens Figure 6. The Three Feature Option Screens Using the Softkeys to Activate a Feature To reset the speakerphone automatic. No user response is required Abbreviated Dialing AD Voice Feature ProceduresHandset and Speaker 6 Press Personal List if you used Personal List in Step 3 Press Personal ListDrop Automatic Callback Auto Callback Bridging/Manual ExclusionSpeaker Coverage Callback Call Coverage/ConsultConsult Call Forwarding - Busy/Don’t Answer Call Forwarding - Follow Me Call Park Call Pickup Conference Drop Handset VolumeHANDSET L H Intercom Automatic/Dial HoldIcom Auto Last Number Dialed Leave Word Calling LWC To leave a message Message Mute Priority Calling Reset Speakerphone Select Ring and Ringer Volume 4 When you hear the desired ringing pattern press Shift again Send All Calls RINGER L H Speaker Send All Calls SPEAKER L H Mute Speakerphone 1 Press Mute Test Transfer Display Feature Procedures Exit NormalInspect Call Information Message Retrieval 1 Press Inspect1 Press Message Retrieve Return Call Normal Exit Time/Date Timer Timer Ringing Tones Tones and Their MeaningFeedback Tones Problem TroubleshootingSolution Problem Key Words to Know access code See feature access code party A person who places or answers a call Page Page FEATURE ACCESS CODES FeatureCode Cancel Abbreviated Dialing MiscellaneousTrunk Codes Description