Lucent Technologies 8405 manual Reset Speakerphone

Reset Speakerphone

Important: You can use this feature only if you are using an 8405B Plus or

8405D Plus voice terminal, if the Reset Spkr label appears under the Speaker button, and if your voice terminal is set for the Speakerphone feature (as opposed to the Speaker feature). If you do not have a Shift button or the Reset Spkr label on your 8405B Plus or 8405D Plus, you do not need to manually activate this feature.

If your 8405B Plus or 8405D Plus is equipped with this feature, you can adjust the speakerphone to the surrounding room acoustics to provide optimal performance. Use the Reset Speakerphone feature in the following ways:

∙Whenever you move your voice terminal to another place (even in the same room)

∙Whenever the red light next to Speaker is fluttering

Note: You may also use this feature when you are on a call in the unlikely event your speakerphone makes a squealing noise during the call. Your speakerphone will adjust itself to normal for that call. (No tones will be heard.)

Important: If there has been an interruption in power (such as, the system has just been powered up again, or you have plugged in the voice terminal at another location), the light next to Speaker flutters until you reset the built-in speakerphone.

You can initiate the Reset Speakerphone feature when your handset is on-hook, or during a call in which you are using the built-in speakerphone. (If a call is in progress, you will not hear the tones, and the new speakerphone adjustment is reset for only the duration of that call.)

Remember you can use the Reset Speakerphone feature only if your voice terminal is set for the Speakerphone feature (as opposed to the Speaker feature).

When you first power up the 8405D Plus voice terminal, the following display appears.

PLEASE RESET SPKR.

BeginCancel

To reset the speakerphone 1	Press the softkey below Begin to reset the
(when the 8405D Plus	speakerphone
voice terminal is first	(Press the softkey below Cancel if you do not want to
powered up)	reset the speakerphone at this time. However, note
	that the red light next to		Speaker	will continue to
	flutter.)
	∙ If you press the softkey below Begin, the display
	shows the following timed screen:
		OPTIMIZING PERFORMANCE
		OF THE SPEAKERPHONE.

32