Lynx Professional Grills L27-2 manual Before eaCh, EleCtrIC Ign ItI on, For the maI brass burne ur

Models: L30PSR-1 L27PSR-2 L42R-1 L36R-1 L27-2 L54PSR-1 L54PSFR-1 L42PSFR-1 L30PSFR-1 L36PSR-1 L30R-1 L27PSFR-2 L27FR-2 L27F-2 L27R-2 L42PSR-1 L36PSFR-1

1 48
Download 48 pages 33.15 Kb
Page 10
Image 10

before eaCh

use

Before any use, always make sure that:

... you do not smell gas

before you light the grill. If

you do smell gas, shut every

thing off and have a qualified

plumber check for leaks.

you never leAve The

grill unATTended while

Coo King

… the cooking area is free

and clear of any combustibles,

besides your food, that might

ignite.

… the control knobs turn

1) n ever attempt to light a burner if you smell gas.

) Always keep the lid open (side-burner lids must be com- pletely removed) when lighting your grill.

) Releasing fuel into a closed grill before lighting will in crease the risk of explosion, property damage , personal injury or death.

) Keep your face and body as far from the grill as possible when lighting. Any time a burner doesn’t light within 5 seconds, turn off the control, wait 5 minutes for gas to dis- sipate, and repeat the lighting procedure.

eleCtrIC Ign ItI on

freely.

… if you are using a

portable propane cylinder, it is

securely connected and leak

tested. (see indeX: “Cylinder

retention i nstructions” for details.)

… you know where the main gas supply shut-off is located

… the burners are seated properly in the grill with mounting legs in the slots.

back of grill.

Before proceeding, make sure you have completed

the “ before each use” checklist.

follow these steps to light any of the burners

first, make sure all burner control knobs are set to off

for the maI brass burne ur

Push

nob conds, llowing the igniter to heat p. Then rotate the knob to liTe ”. After ignition, set the knob to the desired heat setting.

for the rotIsserI e b

a thermocouple sensor with a safety valve that automatically shuts off the flow of gas if the burner goes out. (See I nd EX:

windy Conditions” for tips on how to prevent burner blow out)

To light the rotisserie burner, push and hold the control knob in for  seconds and then turn the knob to the

liTe ” position.

After ignition Con Tinue holding The Con T rol Knob in for 30 to 60 seconds. d uring this time the thermocouple will heat up and the safety valve will remain

open.

If you release the control knob before the thermocouple has heated up, the safety valve will shut off the flow of gas to the rotisserie burner and you will have to re-light the burner.

10

Page 10
Image 10
Lynx Professional Grills L27-2, L42R-1 Before eaCh, EleCtrIC Ign ItI on, For the maI brass burne ur, For the rotIsserI e b