CleAning your lynx grill

STAI n LESS STEEL

Lynx products are known for their attractive appearance.

We achieve this by selecting only the finest grades of stainless steel and applying exacting workmanship.

In order to maintain this at tractive appearance over the life of the grill it is important to take the following steps:

After each use wipe down the exterior of the grill to remove grease and splatters.

Be sure to follow the cleaning instructions for keeping the grates and burners clean and ready for

use.

Use a commercially available Stainless Steel cleaner to clean and polish the exterior surfaces.

doing these things on a regular basis minimizes the amount of effort required.

Part of the appeal of your lynx g rill is the fine grain finish. When removing stubborn stains:

do not use metallic

abrasives and always rub in the direction of the grain.

Some household cleaning products are not suitable for stainless steel; be sure to read the label before using on your lynx g rill.

Always use the mildest cleaning solution first, scrubbing in the direction of the grain. Specks of grease may gather in the grain of the stainless steel and bake on to the surface, giving the appear ance of rust.

To remove these baked-on foods use a fine to medium grit non-metallic abrasive pad (Scotch Brite is good) in con junction with a stainless steel cleaner.

solutions used for cleaning concrete and masonry can be very corrosive and will ‘attack’ stainless steel. ensure your lynx products are well protected before you allow the use of such chemicals near your grill.

s PeCIal note for

loCatI ons near Pools and Coastal areas

The 304 stainless steel material used in the con struction of a lynx g rill is highly rust resistant, however, chlorine in the air from swimming pools or the salt from sea air may cause surface rust to appear and even create some pitting if left on the product.

h ere are a few tips to avoid this:

Regularly wipe down the exterior surfaces with a damp cloth. (Micro fiber cloths such

as Ecloth perform very well).

Allow the surfaces to dry before installing the cover. –do not cover a damp grill.

In extreme environments apply a rust inhibitor which leaves a microscopic protec tive layer on the grill. Products that provide a layer of vapor corrosion inhibitors (vpCi ™) protect the surface very well.

for seasonal storage use the product referred to above, ensure the grill is dry and then cover and secure the cover to minimize the amount of damp air getting to the surfaces.

Th E Lynx LI m ITEd LI fE TI m E wArrAnTy P rovides P ro TeCTion AgAinsT rusT- T hrough of PArTs ThAT render The P roduCT ino P erATive iT does noT Cover oCCAsionAl surfAC e rusT or sTAining due To environ M enTAl Condi T ions

After your first use certain areas of the grill may discolor from the intense heat given off by the burners - this is normal and cannot be cleaned off.

for light and heavy food stains there are many different stainless steel cleaners available.

dri P TrAy

The drip tray should be cleaned after each use.

After the grill is completely cool, remove the drip tray by pulling it out until it stops, then lifting the front edge until the drip tray comes free.

16

Page 16
Image 16
Lynx Professional Grills L27F-2, L54PSFR-1, L54PSR-1, L36PSR-1, L27-2 CleAning your lynx grill, Stai n Less Steel, Dri P TrAy