unpACking And AsseMbly
The grill arrives nearly ready to use and requires only
minor assembly.
By carefully following the uncrating and unpacking steps, you will improve the customer’s first lynx experi-
ence.
Shipping weight on smaller units is app. 300 pounds and larger units may weigh over 500 pounds.
warning
EXCESSIVE WEIGHT HAZARD! 
Use two or more people to 
move or install this unit. Fail
ure to follow this instruction
The wheels sit down in the gaps of the shipping crate so that the grill can sit safely and solidly on the crate during shipping. The grill cannot be slid directly off of the pallet.
►carefully cu
cable ties s
the
warming rack and rotisserie spit (if equipped).
►cut the strapping that secures the briquette trays and carefully lift them out, front first.
can result in back or other
injuries.
C rAT e & CArTon:
►I m Portant!
do not remove staples around the top of the carton. These staples hold a wooden pallet in place inside the carton that protects the unit from damage. Removing these staples may cause the pallet to fall on the top of grill.
h ow to remove the Carton
►cut the main strap holding the grill to the pallet.
►Remove the staples at the bottom of the carton.
►Lift off the carton.
►With assistance, remove grill from pallet and place into desired location.
lifting one end of the grill high enough to place a ramp under the wheel and then lift the other end while rolling the grill off of the pallet.
i nT erior PACKing
lynx uses sturdy
it left our factory. BE SURE you hAve re M oved All Tie downs before using your grill
►Remove the white accessory box and wood packing, the grill racks, and remove any loose items from the firebox.
ke sure you ember
remove wire tie- wns on the rners.
ear™ odels, cut and remove ties from the burner partition on the left side of the Prosear™ burner.
p | u | r |
►Ensure that all burners are properly seated on the burner valve orifice and sitting level with the legs in the frame slots and no
30
