3.3.5 Configure Horn Submenu
The configuration parameters for the horn are the same as those for relays. A horn would not normally require a minimum on time but this parameter allows a more versatile configuration.
3.3.5.1 Horn Summary
H o r n | 4 | N o r m . O f f |
D e l a | y | O n |
Figure
This display example shows that the horn has been configured to operate Normally Off, with a turn on delay and no minimum on time.
Notice that the horn number, 4, is underlined. This indicates that the digit keys can be used to jump to a particular relay, horn or strobe. The relays are numbers 1, 2 and 3; the horn is number 4 and the strobe is 5.
3.3.5.2 Horn Mode
H o r n | N o r m . O f f |
M o d e | : 2 |
| Figure |
This display example shows that the horn is configured to operate in the Normally Off mode. The valid modes are:
–2 Normally Off (default)
–3 Normally On
3.3.5.3Horn Turn On Delay
H o r n | D e l a y | O n |
( m m : s s ) | 0 1 : 0 0 |
|
Figure
The default turn on delay is one minute and the maximum allowed value is fifteen minutes.
3.3.5.4 Horn Minimum On Time
H o r n | M i n | . O n |
( m m : s s ) | 0 0 : 0 0 |
|
Figure
The default minimum on time is zero and the maximum allowed value is fifteen minutes.
Revision 0.07 | 27 |