Manuals / Manitowoc Ice / Kitchen Appliance / Ice Maker

Manitowoc Ice Q130 Water Supply and Drain Line Sizing/Connections, Installation Instructions

Models: Q130

1 40

Download 40 pages 32.69 Kb

Page 14

Water Supply and Drain Line Sizing/Connections

Installation Instructions	Section 2

Water Supply and Drain Line Sizing/Connections

!Caution

Plumbing must conform to state and local codes.

	Location	Water			Water	Ice Machine	Tubing Size Up to Ice
	Location	Temperature			Pressure	Fitting	Machine Fitting
		Temperature			Pressure	Fitting	Machine Fitting

	Ice Making	40°F (4.4°C) Min.			20 psi (137.9 kPA) Min.	3/8” Female Pipe	3/8” (9.5 mm) minimum
	Water Inlet	°	°	C) Max.	80 psi (551.5 kPA) Max.	Thread	inside diameter
	Water Inlet	90 F (32.2		C) Max.	80 psi (551.5 kPA) Max.
						3/8” Female Pipe	3/8” (9.5 mm) minimum
	Condenser Water	40°F (4.4°C) Min.			20 psi (137.9 kPA) Min.	Thread	inside diameter
	Condenser Water	40°F (4.4°C) Min.			20 psi (137.9 kPA) Min.	Q270 Only	Q270 Only
	Inlet	90°F (32.2°C) Max.			150 psi (1034.2 kPA) Max.	Q270 Only	Q270 Only
	Inlet	90°F (32.2°C) Max.			150 psi (1034.2 kPA) Max.	1/2” Female Pipe	1/2” (12.7 mm)
						1/2” Female Pipe	1/2” (12.7 mm)
						Thread	minimum inside diameter

	Condenser Water	---			---	1/2” Female Pipe	1/2” (12.7 mm) minimum
	Drain					Thread	inside diameter

		---			---	1/2” Female Pipe	1/2” (12.7 mm) minimum
	Bin Drain					Thread	inside diameter

VENT TUBING 8”

(20CM) LONG

BIN DRAIN

CONDENSER

WATER DRAIN

TUBING 1/2” MIN. ID

(1.27CM)

CONDENSER

WATER INLET

TUBING

WATER

SHUTOFF

VALVE

ICE MAKING WATER

INLET TUBING 3/8”

MIN. ID (0.95CM)

Typical Water Supply Drain Installation

2-6	Part Number 000001130 12/08

Image 14

Manitowoc Ice Q130 manual Water Supply and Drain Line Sizing/Connections, Typical Water Supply Drain Installation, Section

Contents

America’s #1 Selling Ice Machine Installation, Use & Care ManualQ130/Q210/Q270 UnderCounter Model Ice Machines Read These Before Proceeding Safety NoticesProcedural Notices PERSONAL INJURY POTENTIALManitowoc Cleaner and Sanitizer Table of ContentsSection Installation Instructions Commercial Warranty CoverageSection Before Calling for Service Table of Contents continued Section OperationSection Maintenance Safety LimitsSection General Information AccessoriesMANITOWOC CLEANER AND SANITIZER Model NumbersModel/Serial Number Location General InformationSection Q130/Q210 MODELSAuthorized Warranty Service Owner Warranty Registration CardCOMMERCIAL WARRANTY COVERAGE General Service CallsWHO IS COVERED BY THIS LIMITED WARRANTY? RESIDENTIAL WARRANTY COVERAGE WHAT DOES THIS LIMITED WARRANTY COVER?HOW LONG DOES THIS LIMITED WARRANTY LAST? WHAT ARE MANITOWOC ICE’S OBLIGATIONS UNDER THIS LIMITED WARRANTY?General Section Installation InstructionsIce Machine Dimensions Q130/Q210 ICE MACHINESIce Machine Heat of Rejection Installation InstructionsLocation of Ice Machine SectionInstallation Instructions Leveling the Ice MachineChecking Ice Machine Level SectionGENERAL Electrical ServiceGROUND FAULT CIRCUIT INTERUPTER VOLTAGEWATER INLET LINES Water Service/DrainsWATER SUPPLY DRAIN CONNECTIONSInstallation Instructions Typical Water Supply Drain InstallationWater Supply and Drain Line Sizing/Connections SectionSection Before Starting the Ice MachineInstallation Instructions PERSONAL INJURY POTENTIALSection Installation ChecklistInstallation Instructions Is the ice machine level?WATER PUMP BIN SWITCH WATER TROUGH ON/OFF/WASH TOGGLE SWITCH Section 3 OperationComponent Identification ON/OFF/WASH TOGGLE SWITCHINITIAL START-UP OR START-UP AFTER AUTOMATIC SHUT-OFF OperationIce Making Sequence of Operation 1. Pressure EqualizationOperation Energized Parts ChartSection Siphon System Check Operational ChecksSIPHON SYSTEM WATER FLOAT VALVE CHECKIce Thickness Check WATER LEVEL CHECKICE BRIDGE THICKNESS CHECK SectionTHIS PAGE INTENTIONALLY LEFT BLANK OperationSection CLEANING AND SANITIZING PROCEDURE Section MaintenanceInterior Cleaning and Sanitizing A. Remove the Vinyl HoseDisassembly MaintenanceIce Thickness Probe Cleaning Q210/Q270 Water Distribution Tube DisassemblyQ130 Water Distribution Tube Removal Q130 Water Distribution Tube DisassemblyQ130 Models E. Remove the Float ValveG. Remove the ice damper InstallationF. Remove the Water Trough Q130Section H. Remove the Bin DoorMaintenance PRESS DOWN TO RELEASE DOOR STOP TAB TRACK SLOT SLIDE DOOR FORWARDMaintenance EXTERIOR CLEANINGICE MACHINE INSPECTION SectionWater-Cooled Condenser and Water Regulating Valve CLEANING THE CONDENSERAir-Cooled Condenser MaintenanceWATER-COOLED ICE MACHINES Removal From Service WinterizationSELF-CONTAINED AIR-COOLED ICE MACHINES Pry Open the Water Regulating ValveTHIS PAGE INTENTIONALLY LEFT BLANK MaintenanceSection Section 4-10Maintenance THIS PAGE INTENTIONALLY LEFT BLANKSection Before Calling for Service Checklist1. Move the ON/OFF/ WASH switch to OFF and then back to ON Before Calling for ServiceSafety Limit Feature SectionDetermining Which Safety Limit Stopped The Ice Machine SAFETY LIMITS GeneralSafety Limit Stand-By Mode Safety Limit NotesSection Safety Limit #1Before Calling for Service Freeze time exceeds 60 minutes for 3 consecutive freeze cyclesSection Safety Limit #2Before Calling for Service Harvest time exceeds 3.5 minutes for 3 consecutive harvest cyclesTHIS PAGE INTENTIONALLY LEFT BLANK Before Calling for ServiceSection Page 2110 South 26th Street, P.O. Box Manitowoc, WI 54221-1720, USA Part Number 000001130 12/08 Manitowoc Foodservice2007 Manitowoc Ph 920-682-0161 Fax