Back
pin | 1 | 2 | |
out | |||
|
|
|
| R | BALANCED | IN | L | ANALOG | DIGITAL |
|
|
|
|
| UL US LISTED | AC | IN | |
|
| GROUND |
|
|
| L |
|
|
|
|
|
|
| MODEL NO. PMD570 |
| |
2 | 3 | 1 |
|
|
|
| IN | I / O | REMOTE2 | RS 232C | REMOTE1 | C |
| |||
HOT (+) |
| COLD |
|
|
|
|
|
|
| AUDIO SYSTEM | AC120V 60HZ 0.5A |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| 69 FM | MADE IN JAPAN |
|
|
| + 24 | + 24 |
|
|
| OUT |
|
|
| C A U T I O N |
| SERIAL | NO . |
| |
|
|
| R |
|
|
|
|
|
|
| ||||||
|
|
|
|
|
| IN | OUT | (SPDIF) |
|
|
| RISK OF ELECTRIC SHOCK | WARNING: SHOCK HAZARD- DO NOT OPEN. |
| ||
|
|
| REF=+16dBu/0dBFS |
|
|
|
| DO NOT OPEN | AVIS: RISQUE DE CHOC |
| ||||||
|
|
|
|
|
|
|
|
|
|
| ||||||
1.BALANCED IN ANALOG XLR inputs, L & R
R 
BALANCED IN 
L
+ 24 | + 24 |
REF=+16dBu/0dBFS
XLR connectors are available for balanced analog input.
The balanced XLR connection permits trimming, adjusting the input level. See TRIM L & R below.
For mono recording use either jack. Input from both jacks is mixed internally during mono recording. Mono recording will appear on the left level meter.
To record an incoming signal from the XLR jacks, Bal.In must be selected in the Input Menu.
Example display |
| R | ||
|
| TIME |
|
|
| REC REMAIN | L |
|
|
|
| 00 | 40 20 12 6 2 0 over | |
at stop. |
|
|
| |
|
|
| ||
|
|
| LINE | |
|
|
|
|
|
To select BALANCED IN XLR jacks as inputs for recording:
1.Push and release the MENU/STORE button.
2.Choose a Preset by turning the Jog Wheel.
3.Select the Preset by pushing and releasing the Jog Wheel.
4.Turn the Jog Wheel so Input is flashing.
5.Push and release the Jog Wheel so the input choice is flashing.
6.Turn the Jog Wheel so Bal.In is flashing.
7.Push and release the Jog Wheel to accept the Bal.In choice.
8.Push and release the MENU/STORE button to store the Menu change. Stored is displayed.
See page 24 for a full presentation of Menu selection.
Trim L & R
You can use a small screwdriver to adjust the Trim of the XLR L & R inputs.
R BALANCED IN 
L
+ 24 | + 24 |
REF=+16dBu/0dBFS
The Trim is factory preset at +16 dBu with an adjust- ment range from 0 to +24 dBu.
Some professionals prefer to first set the Trim using a meter and to do a fine adjustment by listening for distortion and watching the level meters on the PMD570.
The pin out for the XLR jacks is printed on the PMD570 for easy reference:
Pin 1 ground, |
| GROUND |
Pin 2 HOT +, | 2 | 1 |
| 3 | |
Pin 3 COLD - |
| |
HOT (+) | COLD | |
. |
|
|
ANALOG | 2. ANALOG IN / OUT jacks | |
L | RCA jacks for line level input | |
| and output. | |
R | L & R ANALOG IN jacks | |
Plug L and R RCA jacks in here | ||
IN OUT | ||
to connect to the Line level | ||
| ||
output jacks of an external mixer or other audio | ||
playback device. |
| |
For mono recording use either jack.
To record, UnBal. must be selected in the Input Menu.
Example display |
| 40 20 12 | 6 2 0 over | |||
|
| TIME |
|
|
|
|
| REC REMAIN | L |
|
|
|
|
at stop. |
| R |
|
|
| |
|
|
| ||||
|
|
|
|
| ||
|
|
| LINE |
|
| |
|
|
|
|
|
|
|
To select ANALOG IN RCA jacks as inputs for recording:
1.Push and release the MENU/STORE button.
2.Choose a Preset by turning the Jog Wheel.
3.Select the Preset by pushing and releasing the Jog Wheel.
4.Turn the Jog Wheel so Input is flashing.
5.Push and release the Jog Wheel so the input
- 21 -
