Marantz PMD570 manual How to Edit EDL marks, EDL mark types Point, Skip, LoopA and LoopB, Erase

How to Edit EDL marks:

All EDL marks are initially entered as 'Point' marks.

From stop or play pause, push and hold the SHIFT button while you turn the Jog Wheel to tab through the EDL marks.

	Example		-dB 00	40 20 12	6 2 0	over
			TRACKTIME
			L
	display		R			-dB
			MARK
When the EDL mark to be edited is displayed release
the		button and immediately push and release
	SHIFT

the Jog Wheel. The current EDL Mark type will be flashing.

		TRACKTIME
Example		L
		-dB00 40 20 12 6 2 0 over
display		R		-dB
	MARK
			LINE

Turn the Jog Wheel to tab through the EDL Mark types: Point, Skip, Loop_A, Loop_B, and Erase.

Example
	L
	TRACKTIME
display	-dB	00	40 20 12 6 2 0 over
	R			-dB
	MARK

When the type you want to change the EDL mark to is flashing press and release the Jog Wheel. TOC Write will be displayed briefly

Example	R
	TRACKTIME
	L
	-dB	00	40 20 12 6 2 0 over
display				-dB
	MARK

and the PMD670 will return to the EDL selection for 4 seconds,

Example	R
	TRACKTIME
	L
	-dB	00	40 20 12 6 2 0 over
display				-dB
	MARK

then return to stop or play pause.

Example	-dB 00	40 20 12	6 2 0 over
	TRACKTIME
	L
display	R		-dB
	TRACK

EDL mark types

Point

Nothing happens during EDL playback.

Skip

Audio following a Skip EDL mark will be skipped during EDL playback. Playback will skip to the beginning of the next EDL mark.

The skipped EDL audio is not erased. The recording is still on the CF card. The skipped EDL recording will play if EDL Play is at Off. You can change the EDL mark type later.

Loop_A and Loop_B

During EDL playback audio following an EDL Point mark is played, and audio following an EDL Skip mark is skipped. When EDL playback reaches the EDL Loop_B point, playback switches to the EDL Loop_A point and continues.

There can only be one EDL A-B loop on a CF card. When a 'Loop_A' or 'Loop_B' exists on a CF card and another is created the old mark automatically changes to a 'Skip'.

Erase

When an EDL mark is erased the remaining EDL marks are automatically renumbered from 1 through the number of EDL marks on the CF card.

EDL Play

See page 37 for instructions on turning the EDL Play Menu item On or Off.

OFF: When the EDL Play is Off PMD570 playback does not respond to EDL mark instructions.

ON: When EDL Play is ON PMD570 playback follows EDL mark instructions regarding playback order, skipping sections of recording on the memory card, or repeating a section of recording on the memory card.

Note:

If the EDL Play Menu item is at On and there are no EDL marks on the CF card, playback is not available. Switch the EDL Play Menu item to Off for playback.

- 45 -