EDL Play
The EDL Play menu turns EDL Play On or Off.
Off
PMD570 playback does not respond to EDL mark instructions.
On
PMD570 follows EDL mark instructions regarding playback order, skipping sections of recording on the memory card, or repeating (EDL
Note:
If EDL Play is at On and there are no EDL marks on the CF card playback is not available. Switch to Off for playback.
Default setting is Off.
1.From stop push and release the MENU/STORE button.
2.Turn the Jog Wheel to select Preset1, 2 or 3.
3.Push and release the Jog Wheel to accept the selected Preset.
4.Turn the Jog Wheel so EDL Play is displayed and flashing.
Example display
5.While EDL Play is flashing, push and release the Jog Wheel. The On or Off will be flashing.
6.Turn the Jog Wheel to toggle between On and Off.
Example display
7.When correct, push and release the Jog Wheel. The display returns to EDL Play flashing.
8.If you are done making Menu changes to the Preset, push and release the MENU/STORE button to save your changes,
stored will be displayed briefly
(or push and release the Stop CANCEL button 
to cancel all changes).
Display returns to stop mode.
Example |
|
|
|
|
|
|
|
|
|
|
TRACKTIME |
|
|
|
|
|
|
|
| ||
display during | L |
|
|
|
|
|
|
|
| |
| 6 2 0 | over | ||||||||
EDL play. | R |
|
|
|
|
|
|
|
| |
TRACK |
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
Remote
The Remote Menu setting is for a wired remote (not supplied) plugged into the REMOTE1 Phone jack. (The optional remote Marantz model RC600 that plugs into the REMOTE2 TRRS connector is plug-
There are four remote modes:
•StartPause
Start or pause during recording or playback. If Auto Mark is ON and EDL mark is added when recording resumes.
•StrtPausTR
Start or pause during recording or playback. After a record pause, recording continues on the next track.
•EDL Mark
During record or playback switch remote to on to add an EDL mark.
•Manual TRK
During recording, switch remote to on to incre- ment the track. A new track is created at that point. There is no break in recording.
Default setting is StartPause.
1.From stop push and release the MENU/STORE button.
2.Turn the Jog Wheel to select Preset1, 2 or 3.
3.Push and release the Jog Wheel to accept the selected Preset.
4.Turn the Jog Wheel so Remote is displayed and flashing.
Example display
5.While Remote is flashing, push and release the Jog Wheel. The current remote setting will be flashing.
6.Turn the Jog Wheel to tab through the remote
- 37 -
