Factory Default
Perform the procedure below to restore the menu settings, passcode, etc., to their factory defaults.
1.Press the DISPLAY button and REC PAUSE button at the same time, and turn the POWER switch ON. At this time, the service menu list is displayed in the display section.
2.Press the VOL + or VOL – buttons to select “Factory Default?”. At this time, the selected menu item is highlighted.
3.If the 1/3/ENTER button is pressed “Default?” is displayed in the display section.
4.While “Default?” is being displayed, press the 8 button and select “YES”.
5.If the 1/3/ENTER button is pressed “Executing ...” flashes in the display section.
•When the settings have returned to the factory default settings, “Completed” is displayed for 1 second, after which the display section returns to the service menu.
•When the settings have been returned to the factory default settings, the “Date Form” default setting is the setting for
the US. This needs to be set correctly for the destination. “Date Form”
US : M/D/Y
Europe : D/M/Y
6.Turn the POWER switch OFF.
79
