Matsushita CF-W5LWEZZ1 2 service manual Removing the HDD, Removing the Top Case, Hdd

9.2.3. Removing the HDD

Preparation : perform the section 9.2.1., 9.2.2. first.

1.Remove the 2 screws (C). Screw (C) : DFHE5025XA (N1)

2.The slide is done in the direction of the arrow and the HDD cover is removed.

Screw (C)

HDD Cover

3.Lift up the HDD unit and remove FFC connector and then remove the HDD unit.

4.HDD is taken out of the HDD case.

Note :

9.2.4. Removing the Top Case

Preparation : perform the section 9.2.1., 9.2.2. first.

1.Insert a small screwdriver into the hole and slide the look in the direction shown by arrow (C) to open the disc cover.

2.The anttena cover (R) is rotated from the bottom case side in the direction of arrow (A) and the antenna cover (R) removed in the direction of arrow

(B).

LCD unit

Antenna cover (R)

B

A

C

Back Side

Please do not bend pins of the HDD connector, at the time of removing HDD and FFCconnector.

Hole

Small screwdriver

HDD Case

HDD

FFC Connector

HDD FFC HDD Unit

3.Remove the 3 screws (D), 2 screws (E) and 3 screws (F) from the bottom case.

Screw (D) : DRHM0092ZA (N4)

Screw (E) : DXHM0057ZA (N7)

Screw (F) : DXHM0039ZA (N6)

Screw (D)	Screw (F)	Screw (F)
Screw (D)
Screw (F)

Screw (D)

Screw (E)

Screw (E)

26