Matsushita CF-W5LWEZZ1 2 service manual Putting Main PW Sheet, Assembly of the Pcmcia Ejector

9.3.3.4. Putting Main PW Sheet

Corner hole part DAI of the CIP set is matched and affixes

Affix without running aground on CPU DAI.

Do not get on the

MAIN PWB sheet 1 W5

machine screw hole

Square hole

Square hole

Two sided tape putting

Main sub cable

USB b oard

Connector connection

Connector connection

9.3.3.5. Assembly of the PCMCIA Ejector

Insert on the tip of the foot under of MDC board

PCMCIA-MAIN sheet Main board

Refer to the explanation for the installation.

Touch the power SW edge

Board externals match	Card bus ejector
There must not be disarrangement from	Explanation	The lever is drawn to the
board externals.	The lever is drawn to
		left before building in.
	the right before building in
	Square hole
		Bend

Card bus ejector’s sheet metal bend part is inserted in

the corner hole part. (An opposite direction is also the same) Multiply the hook surely. (There must not be floatage)

50