Matsushita CF-W5LWEZZ1 2 service manual Assembly of the Wwan Board, Putting Tapes for WM Cable

9.3.2.13. Assembly of the WWAN Board

	LCD hook Wan installation standard
		LCD hook WAN
Rear wall application				The oreder of tightening screw	(LCD hook WAN) :
				The oreder of tightening screw	(WWAN board) :
				Screw	There is no order	specification
					excluding a specified	part.
WWAN board			Rear wall application

Screw

WM cable

Connection

9.3.2.14. Putting Tapes for WM Cable

The cable must not stretch.	A two sided tape of the cable after the cable position	The convex part is
	of Figure 1 is put out is affixed (cable fixation).
	This is affixed along shape so that conductionConductionclothCloth	matched to a red line.
	should not float.

Refer to Figure 1

Conduction cloth

Safety work

PET tape

Root fixation

Edge side standard of conduction cloth

Conductive cloth must not hang to PET tape

45