Matsushita CF-W5LWEZZ1 2 service manual Assembly of the Heat Spreader, Setting Keyboard

9.3.6.8. Assembly of the Heat Spreader

	Heat radiation grease		Installs it in Top case’s dent part.
			Does not run aground on the
	Spread with a tool.
			keyboard installation side.
	Over sheet is pasted
Heat spleader	on an	opposite side.

PET tape

Arrangement standard

Pressure is pressurized by or more.

Safety Work

Attention

Over sheet is pasted on an opposite side.

There is a possibility to damage sheet and cable when the part where aluminum is thin bends. Returns it if bending. However, use not bare- handed but the tool (pliers etc).

Safety Work

It is confirmed that edge part where on keyboard FFC is surely covered with the PET tape.

9.3.6.9. Setting Keyboard

The flaking off papersa (6 places A to F) of a two sided tape are peeled off.

78