9.2.6. Removing the Disc Cover

Preparation : perform the section 9.2.1. to 9.2.3. first.

1.Remove the 1 screw (N) of the disk angle. Screw (N) : DXHM0057(N7)

2.Slide the disc cover to the disc cover shaft and remove the cover.

3.The disk cover shaft is pulled out while sliding and removed it from the disk angle in the direction of the touch pad.

Disc Cover

Disk Cover Shaft

Disc Cover Spring

Screw (N)

Disk Angle

Top Case

9.2.7. Removing the Touch Pad

Preparation : perform the section 9.2.1. to 9.2.3. first

1.Peel off the tape.

2.The 5 hooks of the pad cover are depressed in the direction of the center of the touch pad by using the small screwdriver.

Tape

Hook

Top Case

Hook

Hook

PAD FFC

Hook

3.Remove the hooks of the toutch pad and the Pad button, and remove the touch pad.

PAD Cover

Touch Pad

PAD Button

Hook

28

Page 28
Image 28
Matsushita CF-W5LWEZZ1 2 service manual Removing the Disc Cover, Removing the Touch Pad, Pad Ffc