Metrologic Instruments IS1000 , 4.5. Setting the Timers , Default Value Operating Mode Timer T1 Timer T2 Timer T3 , 4.5.1. Timer T1

IS1000 – Configuration Guide 51
START OF CONFIGURATION END OF CONFIGURATION
4.5. Setting the Timers
Default Value
Operating Mode
Timer T1 Timer T2 Timer T3
Simple Acknowledgment 200 ms
Host System Acknowledgment 200 ms 3 s 2 s
On File / Not On File 200 ms 3 s 2 s
Bell 200 ms 3 s
4.5.1. Timer T1
Default value = 200 ms
Enter the desired value
using the Numeric Pad page 81
(Step of 10 ms)
10 ≤ value ≤ 254
ACCESS CODE TIMER T1
VALIDATION