3.6.Code 128
This symbology offers a great flexibility with its three sets of characters:
•Set A: upper case alphanumeric characters and all ASCII control characters.
•Set B: upper and lower case alphanumeric characters and some symbols.
•Set C: numeric only but which a very high density of characters per inch.
Good quality printed codes are recommended due to the continuous structure (no gaps between characters) and the four types of bar and space widths.
It works with a modulo 103 check character as the last character.
!Note:
The UCC/EAN 128 options are described on next page.
3.6.1.Check Character
VERIFIED BUT NOT TRANSMITTED *
NOT VERIFIED BUT TRANSMITTED
VERIFIED AND TRANSMITTED
3.6.2.FNC2 Function
This function permits the temporary storage of a code in the decoder if this code starts with the FNC2 character. The message buffered will be concatenated and transmitted with next code having no FNC2 character.
FNC2 NOT ACTIVATED *
FNC2 ACTIVATED
START OF CONFIGURATION | END OF CONFIGURATION |
|
|
IS1000 – Configuration Guide | 36 |
