Orbit II Disc-to-Disc Copier Reference Manual – Revision I
5.6 Loading & Unloading CD-Rs:
Loading CD-Rs
The Input Hopper is located on top of the Orbit II unit. Locate the parts identified in the photograph below on your Orbit II CD-to-CD Office Copier.
Singulator Plate
Small diameter
Guide Rods
Stepped
Guide Rod
CD-R Support
Ledge
Because Orbit II has a separate CD Reader, you place only blank discs in the Input Hopper for Copy CD- to-CD?and Copy & Compare? operations. For Compare CD? operations the discs in the Input Hopper will have already been recorded. Master discs are always placed in Orbit II’s CD Reader. We recommend the use of lint free gloves whenever you handle CD-Rs, because fingerprints can affect recording, playback, and printability. To avoid touching critical surfaces, handle CD-Rs by their inside and outside edges.
17
