MicroBoards Technology II manual Writer and Reader Test, Turn Burn CD? on, Copympare& CD?

Orbit II Disc-to-Disc Copier Reference Manual – Revision I

5.8 Writer and Reader Test:

This final trial run will verify that your new Orbit II has not suffered any shipping damage that affects either the Writer or the Reader. You will make a back up copy of the Orbit II distribution CD-R, and you will compare the copy to the master CD-R. You must first change Orbit II’s Setup so that Burn CD? is turned on:

Turn Burn CD? on:

• Press the			key at the	Copy CD-to-CD?
		No
and	Copympare& CD?				prompts.

•Press the Yes key at the System Setup?

Use Buzzer?	,	48x Write?
prompts.

,Copy & Compare?

,BurnCD?

,and Ask Quantity?

,

,

This sequence will return you to the

Copy CD-to-CD?

prompt with Burn CD? on.

Copy the distribution disc:

•Make sure there is one blank (unrecorded) CD-R in the Input Hopper.

• Press the Yes key at the

Copy CD-to-CD?

prompt.

		Quantity? 00
•	When the				prompt appears, press	Yes	to accept the “10s”
	digit setting				will move to the “1s” digit.		the	No	key once
		of “0”. The underline cursor				Press
	to set the “1s” digit to “1”. Press		Yes	to accept the “1s” digit setting of “1”.

•When the CD Reader tray opens, place the Orbit II distribution disc in the CD Reader tray and press Yes .

•Orbit II will copy the distribution disc to the blank CD-R and place it in the Accept Basket.

23