MicroBoards Technology II manual Installation & Setup, Inspecting the shipment for Damage

Orbit II Disc-to-Disc Copier Reference Manual – Revision I

Section 5 Installation & Setup:

The installation and Setup of a Microboards Technology Orbit II Stand Alone Copying System is so simple you may be tempted to proceed without referring to this manual. Unless you already use a Microboards Technology Copying System we suggest that you take the few extra moments required to follow our recommended unpacking, installation, and Setup procedure. During Orbit II CD-to-CD Copy System Setup you will learn how to use our menu driven operating system. You will use the control keypad to configure your Orbit II for basic copying and to determine if the unit has sustained any internal damage during shipment.

5.1 Inspecting the shipment for Damage

Your Orbit II CD-to-CD Office Copier is supplied in one shipping carton. If the outer carton shows signs of shipping damage, notify the shipping company immediately. They are responsible for the condition of the shipment. Contact Microboards Technology Technical Services Group prior to unpacking any equipment that is received in damaged shipping cartons.

If the shipping cartons do not show any signs of damage, unpack the Orbit II.

5.2 Unpacking the Orbit II and verifying shipment contents

The Orbit II shipping carton should contain the following items:

•Orbit II CD-to-CD Office Copier

•Orbit II external Power Supply

•An AC Power Cord

•Microboards Technology warranty registration card and extended warranty information

If any of these items are damaged or missing contact the Microboards Technology Technical Services Group.

Save all of the Orbit II packaging material. You will need the packing material if you ever move your Orbit II, or have to send it in for servicing. Returning an Orbit II for servicing without its original shipping container will void your warranty!

9