Orbit II Disc-to-Disc Copier Reference Manual – Revision I
Verify the distribution disc was copied properly:
•Take the distribution disc copy from the Accept Basket and place it in the Input Hopper.
• Press the 
No 
key at the prompts.
Copy CD-to-CD?
and
orCopy & Compare?
• | Press the |
|
|
| key at the |
| Compare CD? | prompt. | ||||||||
| Yes |
|
| |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
| Quantity? 00 |
|
|
|
|
|
|
|
|
| ||
• | When the |
|
|
|
|
| prompt appears, press |
| Yes | to accept the “10s” | ||||||
|
|
|
|
|
|
| ||||||||||
| digit setting |
|
| will move to the “1s” digit. |
|
| the | No | key once | |||||||
| of “0”. | The underline cursor |
| Press | ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| to set the “1s” digit to “1”. Press | Yes | to accept the “1s” digit setting of “1”. |
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•When the CD Reader tray opens, place the Orbit II distribution disc in the CD Reader tray and press 
Yes
.
•Orbit II will compare the master distribution disc to the copy, and place the copy in the Accept Basket if it passes the content verification test.
You can use this same test sequence to troubleshoot problems with your Orbit II System prior to calling for technical assistance. If you are trying to isolate media quality problems, substitute reference media for discs that have a high reject rate. If you suspect problems with a particular master, substitute a reference master. (You can use your distribution disc as a reference master.) If the term “reference media” or “reference master” is new to you, refer to Sections 3 & 4 of this manual.
When your Orbit II System passes the disc handling, writer, and reader tests it is ready for use. Proceed to Section 6 Basic Orbit II Operation.
If your Orbit II System does not pass the disc handling, writer, or reader test contact your Microboards Technology Technical Support for assistance.
24
