MicroBoards Technology II manual CD-R Handling Tests, Quantity?

Orbit II Disc-to-Disc Copier Reference Manual – Revision I

5.7 CD-R Handling Tests:

These tests will verify that your new Orbit II has not suffered any shipping damage that affects CD-R handling.

Accepted Disc Test:

•Load approximately 10 blank CD-R discs in the Input Hopper. (Remember; Burn CD? has been turned off. The discs you use for this test will not be recorded.)

							Copy CD-to-CD?
•	Press the	Yes	key at the						prompt.
	When the		Quantity?		00			prompt appears, press			to set the “10s” digit
•										No
	to “1”, and	press	Yes	to accept the “10s”				digit setting. The underline cursor will move to the
	“1s” digit. Press		the	Yes		key to accept the “0” setting and tell Orbit II you want a ten disc
	job.

•When the CD Reader tray opens, place a short master (you can use the Orbit II distribution disc) in the CD Reader tray and press Yes .

•Orbit II will perform a simulated copy operation on the 10 discs and place them in the Accept Basket.

•If all of the discs are placed in the Accept Basket, this test has been completed successfully. Proceed to the Rejected Disc Test. If you experienced CD-R handling problems in this test, contact Microboards Technology Technical Support for assistance.

Rejected Disc Test:

•Load approximately 10 blank CD-R discs in the Input Hopper.

• Press the No key at the prompts.

Copy CD-to-CD?

and

Copy & Compare?

Compare CD?

•

Press the

Yes

key at the

prompt.

Quantity?

00

•

When the

prompt appears, press

No

to set the “10s” digit

to “1”, and

press

Yes

to accept the “10s” digit setting. The underline cursor will move to the

“1s” digit. Press

the

Yes

key to accept the “0” setting and tell Orbit II you want a ten disc

job.

•When the CD Reader tray opens, place a short master (you can use the Orbit II distribution disc) in the CD Reader tray and press Yes .

•Orbit II will perform a compare operation on the 10 discs. Because they are blank it will place them on the Reject side of the Orbit 2.

•If all of the discs are placed on the Reject side, this test has been completed successfully. Proceed to the Writer and Reader Tests that follow. If you experienced CD-R handling problems in this test, contact Microboards Technology Technical Support for assistance.

22