Orbit II Disc-to-Disc Copier Reference Manual – Revision I
Unloading Masters:
When the Input Hopper is empty, Orbit II will alert you by sounding the Buzzer, and scrolling an Input Hopper Empty message on the Display.
•If your job is not completed, load the appropriate number of discs into the Input Hopper, and press the 
Yes 
key to continue your job.
•If your job is done, press the No key again. Orbit II will open the Reader Tray so you can unload your master.
•If you are not going to do another job, unload your master and gently push the Reader tray inward until it powers itself closed.
•If you are going to start a different job, replace the master in the Reader tray, insert the desired quantity of discs in the Input Hopper, select the desired Orbit II operation, and press the Yes
key again to close the Reader tray and start the new job.
We suggest you keep the master disc on top of your stack of copies. This will identify the stack of discs, and keep your master available for compare operations or quality assurance tests.
21
