Installation
Installing the appliance
Install the supplied wooden strip on the left side in the niche with the two supplied screws 3 x 20 mm (see illustration).
The measure x is at a niche height of:
13 3/4" (350 mm) =
1 3/16" ± 3/16" (30 ± 5 mm)
14 1/16" (360 mm) =
1 9/16" ± 3/16" (40 ± 5 mm).
Push the appliance into the niche.
Mark the holes.
Pull the oven out.
Drill two left fixing holes with a 1/16" (2 mm) diameter bit.
Push the oven in and align.
Open the oven door and using the supplied screws 3.5 x 25 mm right and 3.0 x 20 mm left, secure it to the cabinet through the holes on either side of the vertical oven trim.
57
