Automatic mobile unit recognition (AWK)
In operating level C the optional Automatic mobile unit recognition (AWK) feature attributes a fixed program place to a mobile unit with valid coding.
Program places
The unit coding (on the mobile unit) and the program place with the corresponding program (in the "Profitronic" electronic control unit) must be matched up.
^Each mobile unit must be coded before being used for the first time. See "Coding the mobile unit".
^The wash program through which the mobile unit is coded has to be assigned to the relevant program place (operating level D, see the "System function - Selector Organization" section in the Programming Manual).
Important!
Before starting the program with the "Start" button 6, check if the program needed for this mobile unit is displayed.
Insufficient wash results may occur! Always check that programs for mobile units with AWK (on fixed program places) are not exchanged.
Mobile unit coding
The AWK assigns a program place to a mobile unit. The mobile units must be coded with a magnetic strip via a Bit combination. In operating level C the only program available for a coded mobile unit is the one assigned to the corresponding program place.
After a coded mobile unit has been put in the machine and the door is closed, the control unit selects the allocated program. Press 6 to start the program.
Coding is affected through 5 Bits:
–Bit 1 through 4 define the mobile unit code,
–Bit 5 serves as a control
16
