IMPORTANT SAFETY INSTRUCTIONS
In critical applications where very high requirements have to be met, it is strongly recommended that all the
relevant factors for the process, such as cleaning agent, quality of water etc. are discussed with the Miele Applications Specialists.
The mobile units and special inserts should only be used for
their specific application.
Empty any containers or utensils before arranging them in the
machine.
Do not allow any remains of acids or solvents, and in particular
hydrochloric acid, chloride solutions or corroding ferrous material to get into the wash cabinet. Similarly avoid any materials with a corrosive effect. The presence in compounds of any solvents should be minimal.
Ensure that solutions or steam containing hydrochloric acid do not
come into contact with the steel outer casing of the machine to avoid any corrosion damage.
Please follow the advice on installation in these instructions
and the separate Installation Instructions.
Using accessories
Only specific additional equipment made by Miele should be
connected to this machine. Consult the Miele Professional Group on the type and application of such equipment.
Disposal of an old appliance
When discarding a lab washer, disconnect it from the power
supply, remove the door to the wash cabinet and cut off the power cord. For environmental and safety reasons ensure the machine is completely drained of any residue water and cleaning agent. (Observe safety regulations and wear safety goggles and gloves). Make the door lock inoperative, so that children cannot accidentally shut themselves in. Make appropriate arrangements for the safe disposal of the machine.
If the machine contains a tank system, remove the water from the tank before disposing of the machine.
The manufacturer cannot be held responsible for any damage caused through
7
