Display, On/Off button Cursor left, Cursor right | Miele G 7835

Guide to the machine

aDisplay

with screen saver, background light switches off automatically after

15 minutes, hit any key to turn the background light on again.

b On/Off button (I-0)

c Cursor left

moves the cursor to the left:

–to the previous menu

–to the previous parameter

–to the previous input location

d Cursor right

moves the cursor to the right:

–to the next menu

–to the next parameter

–to the next input location

e Minus button

–program selection for programs over 24

–going back pagewise in menus

–type in figures and letters

–change default settings, e.g. service parameter

f Plus button

–program selection for programs over 24

–going forward pagewise in menus

–type in figures and letters

–change default settings, e.g. service parameter

g Door switch h Start button

–Starting a program

–Activating insert mode

–Confirming settings

–Confirming menu points, to get to the respective submenu

i Stop button

–Canceling a program

–Leaving the insert window without confirming

–Leaving a menu

j Optical interface (for service technician)

k Program selector Selecting programs 1-23

9

Image 9

Miele G 7835 Display, On/Off button Cursor left, Cursor right, Minus button, Plus button, Door switch h Start button

Contents

Laboratory glassware washer G Contents Contents Use Important Safety Instructions Important Safety Instructions Important Safety Instructions Disposal of an old appliance Using accessories Electronic controls Guide to the machine Display Door switch h Start buttonOn/Off button Cursor left Cursor right Guide to the machine Electric door lock Opening and closing the doorOpening the door To close the door Water softener Select Unit Setting the water softenerEnter Water Hardness Softener Capacity Filling the salt reservoir Salt indicator Mobile unit coding Automatic mobile unit recognition AWK Mobile unit coding strip Setting mobile unit coding Set the program place coding Applications Preparing the items for cleaningLoading the machine Removing excess soils Applications To adjust the upper basket Height adjustable top basketSpring adapter water connection Example upper basket O 190/1 and lower basket U Injector unit 1/1 With connection to TA Laboratory glassware LG Adding of liquid detergents and neutralizers Preparing the DOS dispensersAdditional DOS modules optional Filling the containers with liquid cleaning agents Priming the liquid dispensing systems Dispensing system maintenanceExternal Dispensing systems Optional Operation Power switchTurning on To change the operating level Starting a program Fixed programFree program selection Program sequence Turning offAutomatic mobile unit recognition AWK To change or cancel a program Operating levels B or DOperating levels a or C Cancelling a program Serial interface Cleaning and Care Cleaning the filters in the wash cabinetCleaning the coarse filter Cleaning the fine, flat and micro-fine filters Tilt the locking clamp to the side Cleaning the drain pump and non-return valve Cleaning the control panel Cleaning the water inlet filtersCleaning the exterior Cleaning the filter Drying unit TA Cleaning and care Changing the coarse filterOpen the door of the storage cabinet Replacing the HEPA-Filter Frequently asked questions After sales service Page Installation Instructions Caring for the environment Disposal of the packing materialsDisposal of an old appliance Leveling the legs InstallationRemoving the lid if necessary Protecting the countertop depending on model Water inlet Plumbing DI-Water connection Drainage This Appliance Must be Grounded Electrical connection Grounding the machine Re-assembling the service panel English Metric Technical DataPage Page All rights reserved/3404