Technical Data, English Metric | Miele G 7835 guide

Technical Data

	English		Metric
Height:	33 7/16" (32 5/16")		85 (82) cm
Width:	35 7/16 "		90 cm
Depth:	27 9/16 "		70 cm
Voltage:	208 V
Power cord	approx. 5’ 11"		1.8 m
Water pressure (flow rate):
Recommended	25 - 60 psi		1.72 - 4.13 bar
Acceptable	10 - 147 psi		.7 - 10 bar
Cold or Hot water
connection	up to max. 158°F		70 °C
DI-Water connection
Recommended	25 - 60 psi		1.72 - 4.13 bar
Acceptable	10 - 147 psi		.7 - 10 bar
Delivery head:	min. 12"		0.3 m
	max. 39 3/8"		1 m
Drainage length:	max. 13’		4 m
Water intake hose	approx. 5’ 7"		1.7 m
Drain hose:	approx. 4’ 7"		1.4 m
Noise level in dB (A):			1 m (39 3/8") away
Sound pressure level LpA		At machine	1 m (39 3/8") away
Free stand unit:	(washing)	66.2	54
	(drying)	64.1	52
Built under counter: (washing)		64.1	52
	(drying)	60.2	48

49

Image 49

Miele G 7835 operating instructions Technical Data, English Metric

Contents

Laboratory glassware washer G Contents Contents Use Important Safety Instructions Important Safety Instructions Important Safety Instructions Disposal of an old appliance Using accessories Electronic controls Guide to the machine Display Door switch h Start buttonOn/Off button Cursor left Cursor right Guide to the machine Electric door lock Opening and closing the doorOpening the door To close the door Water softener Select Unit Setting the water softenerEnter Water Hardness Softener Capacity Filling the salt reservoir Salt indicator Mobile unit coding Automatic mobile unit recognition AWK Mobile unit coding strip Setting mobile unit coding Set the program place coding Applications Preparing the items for cleaningLoading the machine Removing excess soils Applications To adjust the upper basket Height adjustable top basketSpring adapter water connection Example upper basket O 190/1 and lower basket U Injector unit 1/1 With connection to TA Laboratory glassware LG Preparing the DOS dispensers Adding of liquid detergents and neutralizersAdditional DOS modules optional Filling the containers with liquid cleaning agents Priming the liquid dispensing systems Dispensing system maintenanceExternal Dispensing systems Optional Operation Power switchTurning on To change the operating level Fixed program Starting a programFree program selection Turning off Program sequenceAutomatic mobile unit recognition AWK Operating levels B or D To change or cancel a programOperating levels a or C Cancelling a program Serial interface Cleaning the filters in the wash cabinet Cleaning and CareCleaning the coarse filter Cleaning the fine, flat and micro-fine filters Tilt the locking clamp to the side Cleaning the drain pump and non-return valve Cleaning the control panel Cleaning the water inlet filtersCleaning the exterior Cleaning the filter Changing the coarse filter Drying unit TA Cleaning and careOpen the door of the storage cabinet Replacing the HEPA-Filter Frequently asked questions After sales service Page Installation Instructions Disposal of the packing materials Caring for the environmentDisposal of an old appliance Leveling the legs InstallationRemoving the lid if necessary Protecting the countertop depending on model Water inlet Plumbing DI-Water connection Drainage This Appliance Must be Grounded Electrical connection Grounding the machine Re-assembling the service panel English Metric Technical DataPage Page All rights reserved/3404