Electrical connection
Grounding the machine
The machine must only be operated with the voltage, frequency and fusing shown on the data plate located on the rear of the machine, and on the plinth (behind the service panel).
The conversion diagram and the wiring diagram is secured to the inner side of the service panel.
Remove the service panel and plinth
,Disconnect the machine from the main electrical supply.
^Remove the fixing screws, a, from the service panel.
^Take hold of the service panel at both sides and pull upwards.
^Unscrew plinth facing (screws b).
^Remove plastic protective cap.
Re-assembling the service panel
^Replace the plastic protective cap, plinth facing and service panel in the reverse order.
^See the supplied installation diagram.
48
